RoPod chambers
RoPod 5
While generating g-code for the RoPod 5 and lid both must be positioned upside up on the plater
Positioning of glass during the print
-
Water tight lid
-
Channels for individual roots
-
Can accommodate up to 18 bio replicates
-
Arcs to guide agravitropically growing roots into their channels
RoPod 4
While generating g-code for the RoPod 4 chamber must be positioned upside up on the plater, while the lid should be flipped 180 degrees
A pause must be inserted while creating the g-code file to insert glass. Snapshot is showing the slice after the glass is added.
-
The lid is easy to remove and place back, for adding treatments during imaging
-
Channels for individual roots
-
Can accommodate up to 18 bio replicates
RoPod 3
While generating g-code for the RoPod 3 chamber must be positioned upside up on the plater, while the lid should be flipped 180 degrees
A pause must be inserted while creating the g-code file to insert glass. Snapshot is showing the slice after the glass is added.
-
The lid is easy to remove and place back, for adding treatments during imaging
-
3 wells for growing different genotypes
-
Separators between wells are not watertight
RoPod 2
While generating g-code for the RoPod 2 chamber must be positioned upside up on the plater, while the lid should be flipped 180 degrees
A pause must be inserted while creating the g-code file to insert glass. Snapshot is showing the slice after the glass is added.
-
The lid is easy to remove and place back, for adding treatments during imaging
-
2 wells for growing different genotypes
-
Separators between wells are not watertight
RoPod 1
While generating g-code for the RoPod 1 chamber must be positioned upside up on the plater, while the lid should be flipped 180 degrees
A pause must be inserted while creating the g-code file to insert glass. Snapshot is showing the slice after the glass is added.
-
The lid is easy to remove and place back, for adding treatments during imaging
-
1 well with no separators, can be used to grow roots along the longer axis
-
Can be also used for mounting samples in a humid chamber instead of using a sample glass and cover slip